SOAPP-CT

Features

Equipment Lists

SOAPP-CT sizes all major plant equipment, based on your project Conceptual Design Input, the process configuration derived from this input, and the results of the heat and material balances, using algorithms derived from design practice and manufacturer's data. SOAPP-CT summarizes the results of this equipment sizing in an Equipment List containing up to 662 equipment design parameters, depending on plant design, including:

  • 22 general project data
  • 28 structural design data
  • 75 combustion turbine system data
  • 56 steam generator equipment data
  • 30 exhaust gas system equipment data
  • 61 condensate/steam system equipment data
  • 18 heat rejection system equipment data
  • 105 pump data for 14 systems
  • 35 balance of plant equipment data
  • 26 tank data for 5 systems
  • 187 piping data for 16 systems
  • 19 electrical equipment data
The Equipment List is supplemented by a Motor List / Auxiliary Power Summary, a multi media Emissions Summary at full load operation, and an Electrical Single Line Drawing. All of these equipment design reports produced by SOAPP-CT are generated dynamically, reflecting every relevant change you make to your project Conceptual Design Input.

 to Painless Heat Balances

Return to Feature Overview

to Process Flow Diagrams
Careers | Contact Us | Copyright Policy | Privacy Statement | Terms of Use 

800.313.3774 or 650.855.2121
 EPRI 3420 Hillview Avenue, Palo Alto, California 94304
© Electric Power Research Institute, Inc. 2001- All rights reserved